Notice:
welconme to China Lithium Grease Manufacturers-LongHai Grease
News
TEL:contact us  
+86 18954613000
Address:
Guangrao County, Dongying, Shandong, China
Whatsapp:
+86 18954613000
Q Q:
812548424
Email:
812548424@qq.com
NEWS   current location:主页 > NEWS >
LITHIUM GREASE MSDSAdd time:2016-07-08
Safety Data Sheet
1. Product / PREPARATION AND THE COMPANY / UNDERTAKING Identification
Product Name:lithium grease
CAS No.:68153-81-1
Supplier: Dongying Longhai Petrochemical Co., Ltd.
ADD:Lique Industrial Park,Guangrao,Dongying,Shandong,China
Emergency contact numbers
Tel: + 86-0546-6283555
2. Hazard Identification
Eye contact: Contact with the eyes can cause irritation
Skin contact: may cause skin irritation or dermatitis
Inhalation can cause respiratory irritation.
Ingestion: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Physical and chemical properties: no danger
Composition 3. Composition / information
Main components: lubricating oil 85%, 10% of the additive, thickening agent (lithium soap): 5%
Chemical name: petroleum-based lubricants, thickeners and additives
Appearance: yellow to brown viscous semifluid
4. First aid measures
Eye contact: Rinse immediately with plenty of water for at least 15 minutes, including the eyelids below. If eye irritation continues, seek medical attention.
Skin contact: Rinse immediately with plenty of water for at least 15 minutes. If the patient is still feeling unwell or symptoms of skin irritation, seek medical treatment.
Ingestion: If swallowed, seek medical advice immediately and show the container and label the product. Not vomiting in the absence of a doctor recommendations. Patient in a coma is prohibited to put anything in the mouth.
Inhalation: If accidental inhalation of vapors, immediately to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Medical treatment.
5. fire fighting measures
Hazardous characteristics: case of fire, high-heat combustion caused.
Combustion products: CO, CO2
Extinguishing agent: Available foam, carbon dioxide, dry, sand saves, fire water invalid.
6. Measures to eliminate accidents
Personal protection: ensure adequate ventilation. Use personal protective equipment. Avoid contact with skin, eyes and clothing. Do not inhale vapors and dust.
Environmental Protection: Do not discharge into surface water or sanitary sewer system. In the security situation permits to prevent further leakage and benefits.
Methods for cleaning up: absorb with an inert substance (eg: sand, silica gel, acid binders, universal binders, sawdust). After sweeping into the suitable container for subsequent processing.
7. Handling and Storage
Operating
Technical protective measures: Provide sufficient air exchange and / or exhaust in work rooms.
Safe handling advice: Do not inhale vapors and dust. If the air is insufficient, wear suitable respiratory equipment. Personnel wearing protective clothing. Avoid contact with skin and eyes. Wash your hands well after handling.
Store
Technical storage measures / criteria: Do not store in open containers. In a cool, dry, well-ventilated place to save, prohibiting contact with flames, sparks, heat objects. .
8. Exposure controls / personal protection
Engineering measures: Ensure adequate ventilation.
Personal Protective Equipment:
General: Flush eyes and shower
Respiratory Protection: If engineering controls do not make the substance concentration in the air drops health limit, should be worn Institute for Occupational Safety and Health canisters organic or P100 / Mine Safety and Health Bureau certificate respirator
Hand protection: Neoprene gloves
Skin and body protection: long-sleeved clothes
Eye protection: safety glasses with side-shields
Hygiene measures Avoid contact with skin, eyes and clothing.
9. Physical and Chemical Properties
Appearance: yellow to brown viscous ointment
Odor: no odor
Penetration 0.1mm 220-250
Dropping Point "140° C
10. Stability and reactivity
Stability: Stable (at room temperature)
Avoid: heat, flames and sparks ..
Materials to avoid: No special requirements.
Hazardous decomposition products: carbon oxides sulfides
Polymerization does not occur
11. The toxicity of information
TOXICOLOGICAL INFORMATION: Acute oral toxicity (once the maximum test) female, male mice LD50 greater than 5000mg / kg BW, the actual low toxicity. Acute inhalation toxicity test (once the maximum test) female, male mice LC50 greater than 10000mg / m³, the actual low toxicity.
12. Ecological Information
Ecotoxicity: No data available
Mobility: No data available
Residue and Degradation: No information available
Bioaccumulation: No data available
13. Disposal matters to be considered
Residual product / waste products: Required in accordance with applicable local regulations for waste processing. Without changes in product use, the product may
In order to deal with a qualified manufacturer or to the local bodies have the right to deal with hazardous waste handling
Contaminated packaging: Do not re-use empty containers
Methods for cleaning up: absorb with an inert substance (eg: sand, silica gel, acid binders, universal binders, sawdust). After cleaning pour
Suitable container for subsequent processing.
14. TRANSPORT INFORMATION
Dangerous Goods Information:
Proper shipping name: Transport department has a responsibility to all laws, regulations and requirements for the transport of goods.
IMO/IMDG: not Regulated
15. Management Information
Directory status
China - Chemical Inventory All components are listed in the directory.
Other Chinese laws
16. Other information
Data sources compiled this data sheet: component Material Safety Data Sheet
Prepared by: parti (Yantai) China Petroleum Technology Co., Ltd.
Fixed Cause: NA
Issue date:2015-04-30
 
Disclaimer
This product provides security information to help our customers to follow safety / health / environmental legislation work. This information comes from the correct data can be used as we can get. But can not guarantee that these data apply to all commercial use and usage, we can not guarantee the results of these data with the use of the process to produce consistent and accurate hazard. Because users have the autonomy to use, so the user has the responsibility to use this product in a safe condition to use. These conditions should apply consistent with our offer. Unless the company's gross negligence, or else the company does not assume legal responsibility for products during use, directly or indirectly, accidents and injury.
End Safety Data Sheet

上一篇:没有了

下一篇:Grease Selection: Lithium vs. Lithium Complex